模-数转换模块用户手册（详细篇）

模-数转换模块用户手册（详细篇）

PLC0.COM-自动化工控技术资料站、三菱、西门子、欧姆龙、信捷、台达、威纶通触摸屏，伺服，步进、继电器、接触器、寄存器技术资料拥有工控软件下载、工控资料下载、工控解决方案、自动化论文、自动化文摘、自动化培训、大讲坛工控视频、工控招聘人才库等自动化工程师社区栏目，提供工控搜索、自动化产品、自动化供求信息，自动化企业库,自动化新闻和行业动态、国外自动化资讯翻译、自动化行业展会预告、工控参考报等服务

在此感谢贵方购买了三菱电机的通用可编程控制器MELSEC-Q系列的产品。
在使用之前应熟读本书，在充分了解Q系列可编程控制器的功能·性能的基础上正确地使用。

目录

安全注意事项 ······································ A – 1
关于产品的应用 ····································· A – 5
修订记录 ········································ A – 6
前言 ·········································· A – 7
目录 ·········································· A – 7
关于手册 ········································ A – 10
EMC指令·低电压指令的对应 ······························· A – 11
关于总称·简称 ····································· A – 12
产品结构 ········································ A – 13
第1章 概要 1 – 1至1 – 2
1.1 特点 ········································ 1 – 1
1.2 关于功能版本B及以后版本中新增的功能 ························ 1 – 2
第2章 系统配置 2 – 1至2 – 7
2.1 适用系统 ······································ 2 – 1
2.2 系统配置注意事项 ·································· 2 – 3
2.3 功能版本、序列号、软件版本的确认方法 ························ 2 – 4
第3章 规格 3 – 1至3 – 31
3.1 性能规格 ······································ 3 – 1
3.1.1 性能规格一览 ·································· 3 – 1
3.1.2 输入输出转换特性 ································ 3 – 2
3.1.3 精度 ······································ 3 – 7
3.2 功能一览 ······································ 3 – 8
3.2.1 A/D转换方式 ·································· 3 – 8
3.2.2 最大值·最小值保持功能 ····························· 3 – 9
3.3 对于可编程控制器CPU的输入输出信号 ························· 3 – 10
3.3.1 输入输出信号一览 ································ 3 – 10
3.3.2 输入输出信号详细内容 ······························ 3 – 11
3.4 缓冲存储器 ····································· 3 – 15
3.4.1 缓冲存储器的分配(Q64AD) ···························· 3 – 15
3.4.2 缓冲存储器的分配(Q68ADV) ···························· 3 – 17
3.4.3 缓冲存储器的分配(Q68ADI) ···························· 3 – 20
3.4.4 A/D转换允许/禁止设置(缓冲存储器地址0：Un\G0) ·················· 3 – 23
3.4.5 CH□平均时间/平均次数设置(缓冲存储器地址1～8：Un\G1～Un\G8) ·········· 3 – 23
3.4.6 平均处理指定(缓冲存储器地址9：Un\G9) ······················ 3 – 24
3.4.7 A/D转换完成标志(缓冲存储器地址10：Un\G10) ··················· 3 – 25
3.4.8 CH□数字输出值(缓冲存储器地址11～18：Un\G11～Un\G18) ·············· 3 – 26
3.4.9 出错代码(缓冲存储器地址19：Un\G19) ······················· 3 – 27

A – 8 A – 8
3.4.10 设置范围(缓冲存储器地址20，21：Un\G20，Un\G21) ················ 3 – 27
3.4.11 偏置·增益设置模式 偏置指定·增益指定
(缓冲存储器地址22，23：Un\G22，Un\G23) ···················· 3 – 28
3.4.12 最大值·最小值存储区(缓冲存储器地址30～45：Un\G30～Un\G45) ·········· 3 – 28
3.4.13 模式切换设置(缓冲存储器地址158，159：Un\G158，Un\G159) ············ 3 – 29
3.4.14 保存数据类型设置(缓冲存储器地址200：Un\G200)(仅Q64AD) ············· 3 – 29
3.4.15 出厂设置以及用户范围设置偏置·增益值
(缓冲存储器地址202～233：Un\G202～Un\G233) ·················· 3 – 30
第4章 投运前的设置及步骤 4 – 1至4- 14
4.1 使用注意事项 ···································· 4 – 1
4.2 投运前的设置及步骤 ································· 4 – 2
4.3 各部位的名称 ···································· 4 – 3
4.4 配线 ········································ 4 – 5
4.4.1 配线时的注意事项 ································ 4 – 5
4.4.2 外部配线 ···································· 4 – 6
4.5 智能功能模块开关设置 ································ 4 – 9
4.6 偏置·增益设置 ··································· 4 – 11
第5章 应用软件包(GX Configurator-AD) 5 – 1至5 – 35
5.1 应用软件包的功能 ·································· 5 – 1
5.2 应用软件包的安装·卸载 ······························· 5 – 2
5.2.1 使用注意事项 ·································· 5 – 2
5.2.2 运行环境 ···································· 5 – 4
5.3 应用软件包的操作说明 ································ 5 – 6
5.3.1 应用软件的通用操作方法 ····························· 5 – 6
5.3.2 操作概要 ···································· 5 – 10
5.3.3 智能功能模块应用软件的启动 ··························· 5 – 12
5.4 初始设置 ······································ 5 – 15
5.5 自动刷新设置 ···································· 5 – 16
5.6 监视/测试 ····································· 5 – 18
5.6.1 监视/测试画面 ································· 5 – 18
5.6.2 偏置·增益设置的操作(功能版本C及以后) ····················· 5 – 22
5.6.3 偏置·增益设置的操作(功能版本B及以前) ····················· 5 – 24
5.6.4 转换特性确认 ·································· 5 – 26
5.6.5 保存数据(Q64AD) ································ 5 – 28
5.6.6 保存数据(Q68ADV/Q68ADI) ···························· 5 – 30
5.7 初始设置/自动刷新设置的FB转换 ··························· 5 – 31
5.8 FB的使用方法 ···································· 5 – 32
5.8.1 概要 ······································ 5 – 32
5.8.2 顺控程序的FB粘贴 ································ 5 – 34
5.8.3 顺控程序的转换(编译) ······························ 5 – 35
第6章 编程 6 – 1至6 – 14
6.1 在普通的系统配置中使用时 ······························ 6 – 1
6.1.1 使用了应用软件包时的程序示例 ·························· 6 – 2
6.1.2 不使用应用软件包时的程序示例 ·························· 6 – 5
6.2 在远程I/O网络中使用时 ······························· 6 – 7

A – 9 A – 9
6.2.1 使用了应用软件包时的程序示例 ·························· 6 – 9
6.2.2 不使用应用软件包时的程序示例 ·························· 6 – 12
第7章 在线模块更换 7 – 1至7 – 36
7.1 在线模块更换的条件 ································· 7 – 2
7.2 在线模块更换时的动作 ································ 7 – 3
7.3 在线模块更换的步骤 ································· 7 – 4
7.3.1 使用出厂设置通过GX Configurator-AD进行初始设置时 ················ 7 – 4
7.3.2 使用出厂设置通过顺控程序进行初始设置时 ····················· 7 – 9
7.3.3 使用用户范围设置通过GX Configurator-AD进行初始设置时
(准备有其它系统可供使用时) ·························· 7 – 13
7.3.4 使用用户范围设置通过GX Configurator-AD进行初始设置时
(未准备有其它系统可供使用时) ························· 7 – 18
7.3.5 使用用户范围设置通过顺控程序进行初始设置时
(准备有其它系统可供使用时) ·························· 7 – 23
7.3.6 使用用户范围设置通过顺控程序进行初始设置时
(未准备有其它系统可供使用时) ························· 7 – 28
7.4 范围基准表 ····································· 7 – 34
7.5 在线模块更换时的注意事项 ······························ 7 – 35
第8章 故障排除 8 – 1至8 – 6
8.1 出错代码一览表 ··································· 8 – 1
8.2 故障排除 ······································ 8 – 3
8.2.1 “RUN”LED闪烁或熄灯时 ····························· 8 – 3
8.2.2 “ERR.”LED亮灯或闪烁时 ···························· 8 – 3
8.2.3 不能读取数字输出值时 ······························ 8 – 4
8.2.4 通过GX Developer的系统监视确认A/D转换模块的状态 ················ 8 – 5
附录 附录 – 1至附录 – 16
附录1 关于A/D转换模块的功能升级 ·························· 附录 – 1
附录1.1 A/D转换模块的功能比较 ·························· 附录 – 1
附录1.2 A/D转换模块的功能与GX Configurator-AD的软件版本的组合 ·········· 附录 – 2
附录1.3 将功能版本A的模块用功能版本B及以后版本的模块替换时的注意事项 ······· 附录 – 2
附录2 专用指令一览表及可使用的软元件 ························ 附录 – 3
附录2.1 G(P).OFFGAN ······························· 附录 – 4
附录2.2 G(P).OGLOAD ······························· 附录 – 6
附录2.3 G(P).OGSTOR ······························· 附录 – 10
附录3 外形尺寸图 ·································· 附录 – 15
索引 索引 – 1至索引 – 2

关于手册